Clear forwarding on a line, Do not disturb (reject all incoming calls), Clear do not disturb – Polycom SpectraLink DCE201 User Manual
Page 35: Redial the last number you dialed, Adjust the headset volume, End the call
Using the Basic Features of Your SpectraLink 8002 Wireless Telephone
1725-36027-001_C.doc
35
Clear forwarding on a line
1. Press
LINE
+ [the line number],
2. Press the
Fwd
softkey and enter the forwarding destination.
3. Press the
Fwd
softkey again.
Do Not Disturb (reject all incoming calls)
Press
FCN 2
. The handset will not ring for new incoming calls.
When the do-not-disturb feature is enabled, the standby screen will
display
Do Not Disturb
.
Clear Do Not Disturb
Press
FCN 2
again to resume ringing.
Redial the last number you dialed
1. Press
START
.
2. Press
Redl
.
3. Verify that the displayed number is the one you want and the line
# is valid.
4. Press
START
.
Adjust the headset volume
While the headset is plugged in, press the up/down volume buttons
on the side of the handset during the call.
End the call
Press the
END
key to return to the standby mode.