Installing the charger – Polycom SpectraLink DCE201 User Manual

Page 12

Advertising
background image

SpectraLink 8002 Wireless Telephone User Guide

12

1725-36027-001_C.doc

Installing the Charger

Your SpectraLink 8002 Wireless Telephone is packaged with one of
two Charger models. The Desktop Charger will charge a single
handset with an installed Battery Pack. The Dual Charger will charge
the handset and a spare Battery Pack.
Place the Charger on a flat, horizontal surface. Plug the power supply
into the Charger and into an appropriate wall outlet. The user must
end any call in progress by pressing the

End Call

key on the handset

before placing it into the Charger. Handsets may be charged while on
hook or while turned off.
While the handset is charging while on hook, it will display its
extension number and

Charging…

as well as an animated battery icon

in the display’s upper right corner. The handset is fully operational
and will ring if called. When the handset is charging while turned off,
only

Charging…

and the animated battery icon will display and no

calls will be received. Note that during the handset charging cycle, the

Charging...

dots will be racing. When the handset is fully charged,

Charge Complete

will display.

Desktop Charger

The Desktop Charger will charge a single handset with an installed
Battery Pack. Place the handset in the Desktop Charger facing
forward. When the handset is placed correctly, the red indicator light
will come on. The indicator light will not come on when the slot is
empty, when the handset is improperly seated, or when the Desktop
Charger has no power applied. The indicator light will remain on
until the handset is removed.

Dual Charger

The Dual Charger is designed to charge the Battery Pack in the
handset and also charge an additional Battery Pack in the rear
charging bay. The handset has charging priority when both slots are
occupied. Place the handset in the front slot, facing forward. The
Battery Pack alone snaps into the rear charging bay. The LED
indicates the status of the Battery Pack in the rear bay.
When the handset is fully charged or is removed, the Battery Pack
will begin charging. Note that the time it takes for the Battery Pack to
charge will be lengthened if its charging cycle is interrupted by the
placement of a handset in the front slot.

Advertising