Panasonic KX-FM280 - Manual (Page 102)

102
Options
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “MESSAGE” or “PAGER”.
MESSAGE: transfers incoming messages.
PAGER:
calls your pager.
OFF: turns off this feature.
● If this feature is not required, select “OFF”.
5 Press .
6 a: If you selected “MESSAGE” in step 4:
Enter the transfer telephone number.
b: If you selected “PAGER” in step 4:
Enter your pager number.
● You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
NO.=
START/COPY/SET
MODE=OFF ▼▲
START/COPY/SET
MESSAGE TRANS.
6 0
1.SYSTEM SET UP
MENU
START/COPY/SET
Dial keypad MENU
/ REDIAL/PAUSE
(Pause)
Setting the message transfer/pager call
Note:
● This feature can be turned on/off remotely
from a touch tone telephone (see page 99).
7 Press .
8 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
How your unit and pager work
When your unit receives
a voice message, it will call
your pager company. Your pager
company will
call your pager. A few minutes later, your pager
will display the same message
you entered in step 6.
(For example: 5555)
Your pager
company
5 5 5 5
Pager
Hi, this
is Mike...
Message you want displayed
on your pager when a voice
message is recorded.
Your pager access
code, if required.
Pauses
Your pager
number