Panasonic KX-FM280 - Manual (Page 137)

Help
137
For assistance, call 1-800-435-7329.
6 Insert the blue gear into the blue core of the new
film.
7 Insert the three green gears into the remaining
cores of the new film.
8 Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
● The shiny side should be facing up.
Blue core
Blue gear
Guide tabs
Slots
Green gears
Guide tabs
Slots
Blue gear
Blue label
Cartridge
Film
9 Lock the four gears of the film by ( ) pushing
back the top side gears and ( ) pulling the
bottom side gears forward until they lock into place.
● If the film is slack, tighten it by winding the
bottom side gears.
B
A
Top
side gear Bottom
side gear
Bottom
side gears
Top side
gears
A B
Insert the film cartridge by matching the blue label
on the cartridge with the one on the unit.
Close the cover securely by pushing down on both
ends.
● The unit will check if the film is installed correctly.
The following message will be displayed.
Display:
● If the following message is displayed, the film is
not inserted correctly.
Reinsert it correctly.
CHECK FILM
PLEASE WAIT
Film
cartridge
Blue labels
Incorrect Correct
Tight
11
10
Ink Film