Panasonic KX-FM280 - Manual (Page 4)

Quick Start
4
For assistance, call 1-800-435-7329.
Installation
Blue labels
Blue label
Bottom
side gears
Leaflet
Blue gear
Film cartridge
(See pages 23 and 24.) 1
Slide the cover open lever forward.
The cover is under tension to improve print quality.
Pull up hard enough to open.
Remove the leaflet from the unit.
If the film in the film cartridge is slack, tighten it by
winding the bottom side gears.
Shipping tape
Remove the shipping tape from the unit and paper stacker, and install as follows.
Shipping tape
Incorrect Correct
Tight
Cover
Cover open
lever
Install the film cartridge into the unit.
Make sure that the blue label on the
cartridge matches the one on the unit.
Close the cover securely by pushing
down on both ends.
A.
B.
G.
F.
E.
D.
C.