Panasonic DMC-FZ2A - Manual (Page 15)

Preparation
15
Inserting the Card
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
• Close the flash. (P37)
1 Slide the lever to the direction of the
arrow to open the Memory Card/
battery door.
2 Insert the card with the label facing
the front of the camera.
• Insert the card, pressing gently until it
locks in place. If the card will not insert
freely, it may be reversed. Do not force
the card.
• Do not touch the connection terminals
on the back side of the card.
3 Close the Memory Card/battery door.
[Removing the card]
1 Open the Memory Card/battery door.
2 Press the card to release.
3 Pull the card out.
4 Close the Memory Card/battery door.
• If the Memory Card door cannot completely
close, take the card out and insert it again.
• If the card cannot be fully inserted, verify
whether the direction of the card is correct.
• We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
• If the card is not fully inserted, the card may
be damaged.
2
2
3
4
OPEN
OPEN
A-BODY.fm 15 ページ ２００３年８月２５日 月曜日 午後２時４分