Panasonic DMC-FZ2A - Manual (Page 21)

Preparation
21
Attaching the Strap
1 Press both sides of the cover to put
the metal fitting out of the cover.
2 Rotate the plastic part of the metal
fitting to the direction of the arrow.
• Please attach the plastic part to the
metal fitting again if it detached.
3 Let the metal fitting pass through the
eyelet of the camera.
4 Rotate the plastic part of the metal
fitting to the opposite direction until it
is locked.
5 Move the cover to the direction of the
arrow, and attach it firmly.
• Be sure to move the cover entirely until
it is attached firmly.
6 Attach the strap to the other side of
the camera in the same way.
1
2
3
5
4
FZ2-A.book 21 ページ ２００３年８月６日 水曜日 午前１０時０分