Panasonic DMC-FZ2A - Manual (Page 22)

Preparation
22
Attaching the Lens Cap
When you turn the camera [OFF] or draw
back the lens, attach the supplied lens cap to
protect the surface of the lens.
1 Let the top of the string pass through
the lens cap.
2 Let the opposite side of the string
pass through the circular part of the
string.
3 Pull to the direction of the arrow.
4 Let the top of the lens cap string pass
through the strap eyelet as shown in
the picture.
5 Attach the lens cap.
• Remove the lens cap before turning on the
camera in the recording mode.
• Even when the lens hood is attached, you
can attach the lens cap without the string.
1
2
3
4
5
FZ2-A.book 22 ページ ２００３年８月６日 水曜日 午前１０時０分