Philips CED370/00 - Manual (Page 13)

14 EN
Connect Navigation box
To receive signal from satellites, connect the
GPS cable on the back of the unit to the
navigation box.
1
Insert the plug of the GPS cable to the
navigation box.
3
Connect the supplied standard connector
to the unit.
If necessary, do the other connections. •
(See the last step in section Connect
wires: ISO connector)
Connect radio antenna
If your car has built-in radio antenna, connect
it to the radio antenna of the system for better
radio signal.
1
Connect the radio antenna on the back of
the unit to the car antenna.