Philips CED370/00 - Manual (Page 15)

16 EN
4
Remove the mounting sleeve with the
removal keys.
5
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
If the unit is not fixed by sleeve but •
by the supplied screws, skip this step.
Mount in the dashboard
Note
For proper operation of the DVD player, the •
chassis must be mounted within 20 degree
horizontal. Ensure that the unit is mounted
within this limitation.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car attery.
If you disconnect the car battery in •
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
If the car battery is not disconnected,
•
to avoid short-circuit, ensure that
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
3
Remove the two transport screws on the
top of the unit.
183 mm
53.5mm
5mm