Philips CED370/00 - Manual (Page 36)

37
English
EN
10 Product
information
Note
Product information is subject to change without •
prior notice.
General
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance 4 - 8
Maximum power
output 40 W x 4 channels
Continuous power
output 22 W x 4 channels
(4 10% T.H.D.)
Pre-Amp output
voltage 2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k load)
Subwoofer output
voltage 2.0 V (CD play mode,
61 Hz, 0 dB, 10 k load)
Aux-in level 500 mV
Dimensions
(W x H x D) 178 x 100 x 160 mm
Weight (main unit) 2.5 kg
Disc player
System DVD / CD audio /
MP3 system
Frequency response 20 Hz - 20k Hz
Signal/noise ratio >75dB
Total harmonic
distortion Less than 1%
Channel separation >55dB
Video signal format NTSC only
Video output 1 +/- 0.2V
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A)
4
Replace the fuse.
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.