Philips CED370/00 - Manual (Page 35)

36 EN
Reset
When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
Tip
When the unit is reset, all the settings restore •
to the factory settings.
Remove the unit
To repair, replace fuse, or replace the unit with
another car audio, remove it from the dashboard.
1
Take off the trim plate.
2
Screw off the four (4) screws on the
left/right side of the unit.
3
Pull the unit out from the dashboard.
9 Others
Listen to other devices
You can connect an external audio/video device
to the unit.
1
Connect the device to the unit with the
supplied MP3-Link cable.
2
Touch >[Media]>[MP3-LINK].
MP3-Link screen displays.
»
3
Begin play on the device (see the device
instructions).