Philips HTS8000S - Manual (Page 43)

English
43
3139 115 2xxx1
AV subwoofer adjustment
You can adjust the AV subwoofer output
level to enhance the bass output.
1
Start playing a music disc that has lots of
mid-bass sounds, then press
SUBWOOFER on the remote.
2
Press VOL +/- to select the desired
bass level.
➜
If the volume control is not used
within five seconds, it will resume its
normal volume control function.
Selecting surround sound
●
Press SURR (SURROUND) to select :
MULTI-CHANNEL or STEREO.
➜
The availability of the various surround
sound modes depends on the sound
available on the disc.
➜
The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround and
Dolby Pro Logic II.
➜
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
Helpful Hint:
– You are not able to select the surround
sound mode if the system setup menu is
turned on.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
●
Press SOUND to select the available
sound effect.
When playing movie discs or in TV mode,
you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
Volume control
●
Adjust VOLUME control (or press
VOL +/- on the remote) to increase
or decrease the volume level.
➜
"
VOL MIN" is the minimum volume
level and “
VOL MAX” is the maximum
volume level.
To turn off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound
and "
MUTE" appears.
➜
To restore the volume, press MUTE
again, or increase the volume level.
Sound and Volume Controls
(continued)
001-049 HTS8000S-00-Eng 22/04/2005, 04:07 PM 43