Petsafe Wireless Pet Containment System PIF-300 - Manual (Page 10)

10 1-800-732-2677
Transmitter
Range Chart
Boundary
Control
Dial
Position
Boundary
Switch
LOW
Boundary
Switch
HIGH
1 5-10 ft. 5-10 ft.
2 5-10 ft. 5-10 ft.
3 15-20 ft. 25-35 ft.
4 20-25 ft. 42-55 ft.
5 25-30 ft. 55-65 ft.
6 35-40 ft. 75-85 ft.
7 40-45 ft. 85-90 ft.
8 40-45 ft. 85-90 ft.
Note: These distances are approximate.
Record Your Settings
Final Boundary
Switch Setting
(HIGH or LOW) Final Boundary
Control Dial
Position (1-8) Receiver
Static Cor-
rection
Level (1-6)
Home
Camping
Vacation
Other
Place the Boundary Flags
The Boundary Flags are visual reminders for your pet of where
the Boundary Zone is located. The Receiver Collar will activate
within 2 to 3 feet of the Boundary Flags.
1. Using the Test Light, with the Static Correction Level set at 2
or greater, hold the Receiver Collar at your pet’s neck height
with logo side facing away from the Transmitter.
2. Walk towards the Boundary Zone until the Receiver Collar
beeps and the Test Light flashes. (4A).
3. Place a Boundary Flag in the ground (4B).
4. Walk back into the Pet Area until the beeping stops.
4A 4B
5. Repeat this process around the Boundary Zone until it is marked with Boundary Flags every 10 feet.
The Boundary Flags may be in different parts of the Boundary Zone and may not be in a line. The
Boundary Zone is 2 to 3 feet wide.
Step
4