Polaris 600 HO IQ Touring CFI - Manual (Page 111)

108
MAINTENANCE
Brakes
Brake Fluid
The brake fluid level can be seen through a plastic sight glass in the
brake reservoir. If the fluid is sufficient, the sight glass will be black. If
the sight glass is any color other than black, add brake fluid.
Replace brake fluid at least every two years with Polaris DOT 4 high
temperature brake fluid. See page 130 for the part numbers of Polaris
products.
WARNING
After opening a bottle of brake fluid, always discard any unused portion.
Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it rap-
idly absorbs moisture from the air. The moisture causes the boiling tempera-
ture of the brake fluid to drop, which can lead to early brake fade and the
possibility of accident or serious injury.
WARNING
Keep the master cylinder cover free of dirt and debris. The vent slits allow for
diaphragm movement, and if they become plugged, movement of brake fluid
below the diaphragm may be restricted, altering brake function.
CAUTION
Brake fluid will damage decals, paint and some plastics. Always wipe up
spills immediately.