Maintenance, Clutch system – Polaris 600 HO IQ Touring CFI User Manual

Page 118

Advertising
background image

115

MAINTENANCE

Clutch System

Drive Belt Installation

1. Drop the drive belt over the

drive clutch and pull back the

slack.

NOTE: To ensure satisfactory

belt life, install belts so

they operate in the same

direction of rotation by

positioning the identifica-

tion numbers so that you

can read them. If

required, separate the

sheaves as outlined in

the belt removal proce-

dures.

2. Rotate the L-wrench counterclockwise to tighten the sheaves while

working the belt to the outer edge of the sheaves.

3. Remove the L-wrench and store it in the tool kit.
4. Reinstall the side panel.
5. Close and secure the hood.

Advertising
This manual is related to the following products: