Panasonic SC-HT920 - Manual (Page 18)

18
RQT7696
Using on-
sc
ree
n
men
u
s
Using on-screen menus
(Refer to page 10 for remote control button positions.)
∫ Play Menu
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
1 2 3 4
Press once.
(When pressed twice, the elapsed play
time indicator appears ‹ below.)
Items shown differ depending on the
type of software.
Select the menu. Make the settings. Press to exit.
Main Menu
DISPLAY
ENTER
Go to the
next menu
Select
Register
Return to the
previous menu
1 2 3
4 5 6
7 8
0
9
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
S10
ENTER
ENTER
Select
Register
DISPLAY
Program
Group
Title
Chapter
Track
Playlist
Content To start from a specific item
Time
To skip incrementally or decrementally
(Time Slip)
1 Press [ENTER] twice to show Time Slip
indicator.
2 Press [ 3 4] to select the time and press
[ENTER].
≥Press and hold [3 4] to alter faster.
To start from a specific time (Time Search)
To change remaining/elapsed time display
Audio
(‹ page 14)
[WMA] [MP3]
To display the current bitrate or sampling
frequency
Still Picture To switch still pictures
Thumbnail To show thumbnail images
Subtitle (‹ page 14)
Marker (VR)
[RAM]
To recall a marker recorded on DVD-Video
recorders
To recall a marker: [
3 4] ‹ [ENTER]
Angle
(with multiple angles)
To select the angle
Rotate Picture
To rotate picture
Slideshow
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
Other Settings
Current playback item Press [ 3 4] to select the elapsed
play time or the remaining time.
Condition—play, pause, or slow/search Current position
∫ Elapsed play time indicator
(Except [JPEG])
Play Speed
[DVD-A] (Motion picture part) [RAM] [DVD-V]
To change play speed
– from
k0.6 to k1.4 (in 0.1 unit steps)
≥After you change the speed
– Output is in stereo.
– Sampling frequency of 96 kHz is converted
to 48 kHz.
Repeat (‹ page 15)
A-B Repeat
Except [JPEG] [RAM] (Still picture part)
To repeat a specified section
Press [ENTER] at the starting and ending
points. Press [ENTER] again to cancel.
Marker
(Except [RAM])
To mark up to 5 positions to play again
Press [ENTER] (The unit is now ready to
accept markers.)
To mark a position: [ENTER] (at the desired
point)
To mark another position: [ 2 1] ‹ [ENTER]
To recall a marker: [ 2 1] ‹ [ENTER]
To erase a marker: [ 2 1] ‹ [CANCEL]
≥This feature does not work during program
and random play.