Panasonic SC-HT920 - Manual (Page 29)

29
RQT7696
O
p
er
a
ti
n
g
o
the
r e
q
ui
pm
en
t
You can use the remote control to operate a Panasonic television or
a video cassette recorder. Connect your equipment referring to
“Connection example” (‹ page 28).
[Note]
The remote control may not work properly with some models.
.
Preparation
≥Face the remote control at the unit and press [TV] to light up the
button.
≥Face the remote control at the television for the following
operations.
Turning the television on/off
Press [ Í AV SYSTEM].
Switching the television’s video input mode
Press [TV/VIDEO].
Changing channels
Press [ X CH] or [W CH].
≥[S10/ENTER] is used to confirm channel selection on some
televisions manufactured by other companies.
Adjusting the volume
Press [TV VOL s] or [TV VOLr].
Preparation
≥Change the video input mode on the television (“VIDEO 2” in the
example).
≥Face the remote control at the unit and press [VCR] to light up the
button.
≥Face the remote control at the video cassette recorder for the
following operations.
Turning the video cassette recorder on/off
Press [ Í AV SYSTEM].
Play, pause and stop
Press [ 1] (play), [;] or [∫].
Fast forward and rewind
Press [ 6] or [5].
Connecting a laser disc or record player
Connect instead of a video cassette recorder (‹ page 28) and
select “VCR” as the source.
≥We recommend using a record player with a built-in phono
equalizer. If your player doesn’t have a built-in equalizer, connect it
first to a separate equalizer and then to the unit.
This remote control can also operate some other brands of televisions
and video cassette recorders. Change the code to operate such
equipment (‹ below).
Face the remote control at the equipment.
While pressing [TV] or [VCR]
Press a numbered button to enter the first digit, and then
the second digit.
The remote control outputs the on/off signal. If the code is correct,
the equipment turns on or off. If it doesn’t, try entering another code.
[Note]
Reenter the codes after you change the batteries.
Press [AUX] to select “AUX” as the source.
1
Press [DVD/CD] to select “DVD/CD”.
or
Press [TUNER/BAND] to select “FM” or “AM”.
2
Start recording and play.
This unit can decode the surround signals received through satellite
broadcasts. Refer to your satellite receiver’s operating instructions
for details.
Press [SHIFT] + [DIGITAL] to select “D-IN” (Digital In) as
the source.
≥Main unit: Press [DIGITAL IN].
Operating the television and the video cassette recorder
Television
Video cassette recorder
Changing the remote control code
Operating the tape deck or satellite
receiver
Listening to the tape deck
Recording to the tape deck
Listening to the the surround signals from a satellite
receiver
Television code list
Panasonic: 01, 02, 26
Sony: 04
Fisher: 14
G-E:
02, 03, 07, 09
Gold Star: 07, 15
Hitachi: 05, 07
JVC: 12
LXI:
03, 06, 07, 10,
14, 15
Magnavox: 06, 07, 11, 15,
22
Mitsubishi: 07, 15, 16, 21
NEC: 07, 15
Philco: 06, 07
Philips: 06
Pioneer:
02, 10, 19
Quasar: 02
RCA:
03, 07, 09, 13,
23, 24, 25
Sanyo: 14
Sharp: 08,
21
Sylvania: 06, 07, 15
Symphonic: 17
Toshiba: 10,
21
Zenith: 18, 20
Video cassette recorder code list
Panasonic: 01, 02, 09, 33
Sony: 05, 06, 07, 35,
36, 37
Fisher: 13, 14, 15, 18,
34
Funai: 08, 30
G-E: 02, 03, 11
Gold Star: 27
Hitachi: 09, 10, 11
JVC: 19, 25, 31, 38,
39, 40
LXI: 10, 13, 14, 15,
18, 27, 30
Magnavox: 02, 09, 12
Mitsubishi: 21, 22, 28, 29
NEC: 19, 25, 31, 38
Philco: 02, 09, 12, 30
Philips: 02, 09, 12
Pioneer: 09
Quasar:
01, 02, 09, 33
RCA: 02, 03, 04, 09,
10, 11, 12, 23,
24, 26
Sanyo: 14, 18, 34
Sharp: 16, 17
Shintom: 32
Sylvania:
02, 09, 12, 30
Symphonic: 30
Toshiba: 23,
24
Zenith: 20