Philips WP3810 - Manual (Page 11)

Installing the filter cartridge
1 Make sure the tap is closed.
2 Set the water selection lever to the unfiltered stream
position (Fig. 22).
3 Tilt the filter cartridge 90° backwards and insert it into the water
purifier housing. (Fig. 23)
4 Pull the cartridge upwards until it is in upright position. (Fig. 24)
Using the water purifier
1 Make sure that the water purifier housing and the filter cartridge
are properly installed.
2 Turn the water selection lever to the desired setting (‘click’).
Filtered spray
Select this setting for drinking, washing vegetables or fruits and or cooking.
1 Turn the water selection lever until the filtered spray symbol is
aligned with the indicator (Fig. 25).
Do not let water hotter than 40°C run through the water purifier at
this setting, as this may reduce the effectiveness of the activated carbon.
Unfiltered spray
Select this setting for washing dishes and other jobs that require a gentle
water flow.
1 Turn the water selection lever until the unfiltered spray symbol is
aligned with the indicator (Fig. 26).
Do not let water hotter than 65°C run through the water purifier at
this setting, as this may damage the water purifier.
English 11