Philips WP3810 User Manual
Page 14
Question
Answer
Why does water
leak from
the attachment nut?
Perhaps you have not installed the water
purifier properly. Reinstall the water purifier
according to the instructions in this user manual.
Perhaps the attachment nut or the tap-
mounting adapter is damaged. Contact an
authorised Philips service centre.
Perhaps the tap water pressure is higher than
specified.
You may need to wind some Teflon tape around
the thread of the adapter.
Why is the water
flow weak at
the unfiltered
setting?
Perhaps the stainless steel screen under the
rubber washer inside the water purifier housing
is clogged. Clean it with a toothbrush and rinse it.
Why is the water
flow is weak at the
filtered setting?
Perhaps the filter cartridge is clogged. Replace
the filter cartridge.
Perhaps the tap water pressure is lower than
specified.
Product specifications
Product type
number and name
WP3811 Philips Micro Pure
Type
Direct tap mount
Major filter
components
Polysulphone hollow-fibre membrane and
granular activated carbon
English
14