Philips WP3810 - Manual (Page 7)

supervision or instruction concerning use of the water purifier by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the water purifier.
Before daily use
- To prevent quick clogging of the filter cartridge, let the water run at
the unfiltered setting for around 5 seconds before every use.
- If the water is highly coloured or turbid due to work on your water
network, do not let the water run at the filtered setting until the
water is clear.
- Cautions:
1 Let the water run at the filtered setting for 10 seconds before use
each day.
2 Let the water run at the filtered setting for 60 seconds before use if
you have not used the water purifier for more than two days.
3 If you have not used the water purifier for more than two weeks, let
the water run at the filtered setting for 2-3 minutes before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.
Water temperature
- Do not let water hotter than 65°C run through the water purifier at
the unfiltered setting or hotter than 40°C at the filtered setting.
This may damage the water purifier.
- Do not let the water purifier freeze.
applications
- Only use the water purifier to filter water that meets drinking water
standards.
- Do not use this water purifier in combination with electric taps.
- Do not block the filtered water outlet or connect other devices to it.
- If the water pressure is very high, reduce the water flow of the tap to
prevent damage to the cartridge.
- Keep the water purifier away from heat to avoid distortion or breakage.
- Do not tamper with the water purifier.
- Do not remove the filter cartridge while you use the water purifier.
English 7