Philips MIIC-201D/U - Manual (Page 21)

15
2 System Requirements
One of the following MCC I 2 C Bus adapters:
1. iPort/USB (#MIIC-204) USB to I
2
C Bus Host Adapter.
2. iPort/AFM (#MIIC-203) RS-232 to I 2 C Bus Host Adapter with ASCII Fast
Mode Interface.
3. iPort/AI (#MIIC-202) RS-232 to I
2
C Bus Host Adapter with ASCII Interface
4. iPort (#MIIC-201) Windows to I 2 C Bus Host Adapter.
5. Variable Clock Rate (#MIIC-201-V) I 2 C Bus Host Adapter.
6. iPort DLL/USB (#MIIC-201D/U) I 2 C Bus Host Adapter.
Windows 95 OS or higher. Windows 98se, 2000, XP or higher for iPort/USB and
iPort DLL/USB. One free RS-232 Serial Port, or USB port for iPort/USB and iPort
DLL/USB.
3 iPort Utility Pack Installation
3.1 Installing from CD
1. Insert a software distribution CD into your CD drive.
2. If the install program does not start automatically, select Start
*
Run and type
“D:SETUP.EXE.” Click OK.
3. Follow instructions on screen.
3.2 Installing from the Web
Visit MCC’s web site (www.mcc-us.com), and click on the Upgrades/Updates link.
1 Follow the instructions listed on the Upgrade/Update web page.