Philips MIIC-201D/U - Manual (Page 23)

17
Opening Screen
Main Application
4.1 Message Center Operations
Communicating with another device on the I 2 C Bus is easy. Just install the software
as described in Section 3, then follow these simple steps:
4.1.1 Starting the Message Center
Click, Start
*
Programs
*
iPort Utility Pack
*
iPort Message Center
4.1.2 Selecting the Adapter
Select the I 2 C adapter you are using by clicking the corresponding adapter image
(see Opening Screen), or the Device Select checkbox (see Main Application
Screen).