Philips MIIC-201D/U - Manual (Page 30)

24
4.2.1 Set Adapter Type
iPort/USB iPort/USB (#MIIC-204)
iPort/AFM iPort/AFM (#MIIC-203)
iPort/AI iPort/AI (#MIIC-202)
iPort iPort (#MIIC-201)
Variable Variable Clock (#MIIC-201-V)
iPortDLL/USB iPort DLL/USB (#MIIC-201D/U)
The Adapter Type argument should be the first argument in the argument list as it
controls the availability of other arguments. If the Adapter Type is not specified, the
startup adapter selection screen will be presented.
4.2.2 Set RS-232 Communication Port
1
st
Available ComPort (Default)
COM1...COM40
Set the RS-232 communications port attached to the I 2 C adapter.
4.2.3 Set RS-232 Baud Rate
BAUD19200 (Default)
BAUD57600 (iPort/AFM or iPort/USB ONLY)
BAUD115200 (iPort/AFM or iPort/USB ONLY)
Set the RS-232 Baud Rate.
4.2.4 Set I
2
C Bus Clock Rate
CLOCK12.5K (iPort and iPort DLL/USB ONLY)
CLOCK23K (iPort/AFM and iPort/USB ONLY)
CLOCK86K (iPort/AFM and iPort/USB ONLY)
CLOCK100K (iPort, iPort/AI, iPort/AFM, iPort/USB, iPort DLL/USB,
Default)
CLOCK400K (iPort/AFM and iPort/USB ONLY)
VCLOCK=nnnHz (Variable ONLY. nnn=451...57787)
Set the I 2 C Bus Clock Rate to the specified value. The defaults rate for the Variable
Clock adapter is 451Hz. The Variable Clock adapter does not support all rates