Planet Technology IP DSLAM IDL-4801 - Manual (Page 121)

IP DSLAM 121
5.3 ABOND Commands
5.3.1 ABOND group intf Commands
5.3.1.1 Get abond group intf
Description:
Use this command to get.
Command Syntax:
get abond group intf [ifname <interface-name>]
5.3.1.2 Create abond group intf
Description:
Use this command to create.
Command Syntax:
create abond group intf ifname<interface-name> groupid <groupid-val>
[ minaggrrateupstrm <minaggrrateupstrm-val> ] [ minaggrratednstrm
<minaggrratednstrm-val> ] [ diffdelaytolupstrm <diffdelaytolupstrm-val> ]
[ diffdelaytoldnstrm <diffdelaytoldnstrm-val> ] [ asmprotocol Enable | Disable ]
[ sidformat EightBitSid | TwelveBitSid ] [ maxrxbitrateratio
<maxrxbitrateratio-val> ] [ linkhecthrshld <linkhecthrshld-val> ]
[ numoflinksupforgrpup One | All ] [ asmirlthreshold <asmirlthreshold-val> ]
[ maxatmportusrate <maxatmportusrate-val> ]
5.3.1.3 Delete abond group intf
Description:
Use this command to delete.
Command Syntax:
delete abond group intf ifname <interface-name>