Planet Technology IP DSLAM IDL-4801 - Manual (Page 558)

IDL series User Guide 558
5.21.10.2 Modify trfclass profile class
Description:
Use this command to get.
Command Syntax:modify trfclass profile class profileid <profileid-val>classid
<classid-val> [size <size-val>] [thrshld1 <thrshld1-val>]
Parameters:
Name Description
profileid <profileid-val> Traffic class profile identifier.
Type: Modify -- Mandatory
Get -- Optional
Valid values: 1 - 10
classid <classid-val> Traffic class profile class identifier.
Type: Modify -- Mandatory
Get -- Optional
size <size-val> This parameter specifies the size of the Traffic
class.
Type: Modify -- Optional
thrshld1
<thrshld1-val>
This parameter specifies the low threshold of the
queue, as a percentage of the queue size. When
the queue is full beyond this threshold, only
conforming frames are passed and
non-conforming frames are dropped. Conformance
of frames is determined as per IRL configured on
input the ATM port.
Type: Modify -- Optional
Valid values: 0 - 100
Example:
$ get trfclass profile class profileid 1 classid 1
Output:
Profile Identifier : 1 Class Id : 1
Traffic Class Param Size : 32 Traffic Class Param Thresh : 50