2 aggr info commands, 1 get aggr intf, 2 create aggr intf – Planet Technology IP DSLAM IDL-4801 User Manual
Page 134: 3 delete aggr intf, 4 modify aggr intf
IDL series User Guide
134
5.4.2 Aggr info Commands
5.4.2.1 Get aggr intf
Description:
Use this command to get.
Command Syntax:
get aggr intf [ifname <interface-name>]
5.4.2.2 Create aggr intf
Description:
Use this command to create.
Command Syntax:
create aggr intf ifname <interface-name> [ ip <ip-val> ] [ mask <mask-val> ]
[ usedhcp False | True ] [ mgmtvlanid <mgmtvlanid-val> ] [ mgmtsvlanid
<mgmtsvlanid-val> ] [ priority <priority-val> ] [ enable | disable ]
5.4.2.3 Delete aggr intf
Description:
Use this command to delete.
Command Syntax:
get aggr intf [ifname <interface-name>]
5.4.2.4 Modify aggr intf
Description:
Use this command to create.
Command Syntax:
create aggr intf ifname <interface-name> [ ip <ip-val> ] [ mask <mask-val> ]
[ usedhcp False | True ] [ mgmtvlanid <mgmtvlanid-val> ] [ mgmtsvlanid
<mgmtsvlanid-val> ] [ priority <priority-val> ] [ enable | disable ]