21 filter rule entry commands, 1 get filter rule entry, 2 create filter rule entry – Planet Technology IP DSLAM IDL-4801 User Manual
Page 383: 3 delete filter rule entry, 4 modify filter rule entry
IP DSLAM
383
5.13.21 Filter rule entry Commands
5.13.21.1 Get Filter rule entry
Description:
Use this command to get.
Command Syntax:
get filter rule entry [ruleid <ruleid-val>]
5.13.21.2 Create filter rule entry
Description:
Use this command to create.
Command Syntax:
create filter rule entry ruleid r<ruleid-val> [ action drop | allow | setprio |
sendtocontrol | retagprio | copytocontrol | clfrdef | gotonextrule | forwardexit|
exprdef | modifytos | setbaclevel | pktvlanid | retagvlanid | pktservicevlanid |
retagservicevlanid | retagserviceprio | ratelimiter | Mirror ] [ description
<description-val> ] [ priority <priority-val> ] [ status enable | disable ]
[ statsstatus enable | disable ] [ ruleprio low | high ] [ ruledir in | out ]
[ applywhenreq enable | disable ] [ pkttype Mcast | Bcast | Ucast ] [ snooplevel
interface | bridge ] [ exprid <exprid-val> ] [ actionval <actionval-val> ]
[ actionmask <actionmask-val> ]
5.13.21.3 Delete filter rule entry
Description:
Use this command to delete.
Command Syntax:
delete filter rule entry ruleid <ruleid-val >
5.13.21.4 Modify filter rule entry
Description:
Use this command to modify.