Planet Technology IP DSLAM IDL-4801 - Manual (Page 115)

IP DSLAM 115
5.2.2 Bridge port prioinfo Commands
5.2.2.1 Get bridge port prioinfo
Description:
Use this command to get.
Command Syntax:
get bridge port prioinfo [portid <portid-val >]
5.2.2.2 Modify bridge port prioinfo
Description:
Use this command to modify.
Command Syntax:
modify bridge port prioinfo portid portid [defprio <defprio-val>] [numtrfclass
<numtrfclass-val>] [defsvprio <defsvprio-val>]
Parameters:
Name Description
portid <portid> Port number of the port for which this entry contains bridge
management information.
Type: Modify -- Mandatory
Get -- Optional
Valid values: 1 - 386
defprio <defprio-val> The default ingress User Priority which can be configured by
the user.
Type: Modify － Optional
Valid values: 0 - 7
numtrfclass
<numtrfclass-val>
The number of egress traffic classes supported on this port.
Type: Modify － Optional
Valid values: 1 - 8
defsvprio
<defsvprio-val>
Not supported
Type: Modify Optional
Valid values: 0 - 7
Example:
$ get bridge port prioinfo portid 1