Planet Technology IP DSLAM IDL-4801 - Manual (Page 119)

IP DSLAM 119
5.2.4 Bridge port priomap Commands
5.2.4.1 Get bridge port priomap
Description:
Use this command to get.
Command Syntax:
get bridge port priomap [portid <portid-val >] [usrprio <usrprio-val >]
5.2.4.2 Modify bridge port priomap
Description:
Use this command to modify.
Command Syntax:
modify bridge port priomap portid <portid-val > usrprio <usrprio-val>
[regenprio <regenprio-val >]
Parameters:
Name Description
portid <portid-val > Port number of the port for which this entry contains bridge
management information.
Type: Modify -- Mandatory
Get --Optional
Valid values: 1-386
usrprio <usrprio-val > The User Priority for a frame received on this port. Since it
can arrive in a tag header, it can have range 0-7.
Type: Modify -- Mandatory
Get --Optional
Valid values: 0 - 7
regenprio
<regenprio-val >
The priority to which the incoming User priority is mapped
for this port.
Type: Modify --Optional
alid values: 0 - 7
Example:
$ get bridge port priomap portid 1 usrPrio 1