7 ppppr interface commands, 1 get pppr intf, 2 create pppr intf – Planet Technology IP DSLAM IDL-4801 User Manual
Page 508: 3 delete pppr intf, 4 modify pppr intf
IDL series User Guide
508
5.19.7 PPPPR Interface Commands
5.19.7.1 Get pppr intf
Description:
Use this command to get.
Command Syntax:
get pppr intf [ifname <interface-name>]
5.19.7.2 Create pppr intf
Description:
Use this command to create.
Command Syntax:
create pppr intf ifname <interface-name>lowif <lowif-val> [ maxpdu
<maxpdu-val> ] [ ppprackto <ppprackto-val>] [ lowiftoggletimerto
<lowiftoggletimerto-val> ] [ nature dynamic | static ] [configstatus Normal |
Config ] [ pktpriority <pktpriority-val> ] [enable | disable]
5.19.7.3 Delete pppr intf
Description:
Use this command to delete.
Command Syntax:
delete pppr intf ifname <interface-name>
5.19.7.4 Modify pppr intf
Description:
Use this command to modify.
Command Syntax:
modify pppr intf ifname <interface-name> [ppprackto <ppprackto-val>]
lowiftoggletimerto <lowiftoggletimerto-val>] [nature dynamic | static] [pktpriority
<pktpriority-val>] [enable | disable]