Maintenance, Alternator belt inspection, Air filter (fst) – Polaris FST Touring User Manual

Page 107: Foam oil breather filter

Advertising
background image

104

MAINTENANCE

Alternator Belt Inspection

Inspect the alternator belt condition and tension at the intervals

outlined in the Periodic Maintenance Table beginning on page 88.
1. Stop the engine.
2. Open the hood.
3. Inspect the belt for wear,

cracks or other damage.

If the belt is worn or

damaged, install a new

belt.

4. Grasp the alternator belt

and attempt to twist it.

5. If the belt rotates 1/4 turn

(90 degrees) or more (as

shown), tighten the belt or install a new belt.

Air Filter (FST)

Inspect the air filter for oil and dirt accumulation at the intervals

outlined in the Periodic Maintenance Table beginning on page 88.
1. Open the air box.
2. Remove the air filter.
3. Shake or pat the filter to clean it, or install a new filter. Do not

attempt to clean the filter with liquids.

Foam Oil Breather Filter

Clean or replace the breather element at each engine oil change. See

page 97. Clean the element if the snowmobile has been tipped on its

left side three times.

Advertising
This manual is related to the following products: