Polaris FST Touring - Manual (Page 93)

90
MAINTENANCE
Periodic Maintenance Interval Table
D
= Perform
"
= Replace
DAILY
or
PRE-
RIDE
INITIALLY
mi
(km)
YEARLY
or EVERY
mi
(km)
Item Pg Instructions
(see referenced pages)
150
(240)
500
(800)
1500
(2400)
Engine Mounts -- Inspect, replace if worn or damaged
D D
Spark Plugs 102 Inspect condition/gap, replace as
needed
D D
Exhaust System 105 Check muffler and pipe condition,
replace damaged or missing compo-
nents, clean plastic surfaces
D D
Hoses -- Inspect for wear, damage and prop-
er routing, replace as needed
D D
Brake Pads/Disc 111 Inspect, replace if worn or damaged
D D
Fuel Vent Lines 103 Inspect, replace if worn or damaged
D D
Ski Toe 126 Verify alignment, see your dealer for
adjustments D D
Cooling Fins/
Shroud
-- Inspect and clean
D D
Valve Lash -- See your dealer.
FS Specifications
Intake: 0.08 - 0.15 mm
Exhaust: 0.15 - 0.20 mm
FST Specifications
Intake: 0.08 - 0.15 mm
Exhaust: 0.18 - 0.23 mm
D EVERY
3000 (4800)
Cooling System 107 Bleed the cooling system, inspect
for leaks and proper circulation
EVERY
2000 (3200
Fuel Filter 103 Inspect, replace as needed
EVERY
2000 (3200)
Suspension Shock
Oil
-- Classic/Switchback only, see your
dealer for inspection
EVERY
2000 (3200)