Panasonic 35 - Manual (Page 2)

LED product safety precautions
ii
LED Product Classification
The light source of the LED head connected to this product is classified as 3B under the
JIS C6802 “Safety of laser products.”
Max output: 780mW Wavelength: 365±5 nm
Class 3B LED Product JIS C6802: 2005
Max output: 940mW Wavelength: 385±5 nm
Class 3B LED Product JIS C6802: 2005
DANGER
Controlling or calibrating this product by other than the procedures stipulated here could
cause exposure to dangerous LED radiation.
・ Do not look directly at LED-UV light, or at LED-UV light reflected in a mirror or
other reflective surface. Doing so could cause eye damage.
・ Install the main unit so that humans are not exposed to LED-UV light.
Exposure could injure the skin or cause other injury.
・ Always turn off the key switch before cleaning the LED head.
Cleaning the head while the switch is on could cause eye damage or injury to the skin.
・ Never disassemble this product.
Disassembling this product could cause exposure to LED-UV light, causing eye
damage or injury to the skin.
・ If there is a risk of the LED-UV light being exposed to UV reflective light, place the
product inside a cover with proper reflectance and heat characteristics to block that
reflected light.
・ When operating the controller, set up the system so that the path of the LED-UV light
is not at eye level.
・ It is strongly recommended that a protective barrier be placed around the product,
so that people cannot approach it while it is operating.
・ Always wear the UV protective goggles when using this product.
・ Never operate this product in a manner not described in this manual. Doing so risks
exposure to LED-UV light.
Safety Precautions for Users
JIS C6802 stipulates user guidelines pertaining to safety precautions to be taken by users
and management standards.
In the case of this product, please implement safety precautions for a class 3B LED
product. See JIS C6802, “Safety of laser products” for details. In the abroad, see the
standard according each country.