Panasonic 35 - Manual (Page 30)

Operation modes
20
6.4 Timing chart
1) Batch irradiation:
Heads selected (*1) with CH1 through 4 operation button in front of the controller are processed in batch
irradiation mode.
・ Preparation of batch irradiation: READY All is ON (*2) .
・ Batch irradiation start: Press EMISSION button in front of the controller or turn on START ALL input
signal on the backside.
・ Batch stop: Press EMISSION button during irradiation or turn on STOP input on the backside.
① Batch timer irradiation