Panasonic AG-DVX100AP - Manual (Page 26)

Using the LCD monitor
1
Set the camera recorder’s POWER switch to
ON.
2
Press the OPEN button in the direction of the
arrow 1 to open the LCD monitor.
3
Position the LCD monitor where its screen
images can be seen most comfortably.
O
The LCD monitor can be rotated up to 180
degrees toward the lens and up to 90
degrees toward you.
Do not allow an unreasonable amount
of force to be applied to the LCD
monitor while it is open. Doing so may
cause the unit to malfunction.
180 ° 90 °
1
2
4
Select YES as the setting for the LCD SET
item on the setting menu DISPLAY SETUP
screen.
O
For details on the menu operations, refer
to page 39.
26
Viewfinders
O
The setting for the EVF SET item can be
returned to the factory setting by pressing
the COUNTER RESET button when the
item concerned has been selected so that
it is possible to change the setting.
O
When ON is selected as the setting for the
EVF MODE item on the setting menu
DISPLAY SETUP screen, images will
always appear in the viewfinder even when
the LCD monitor is opened.
O Either color or monochrome can be
selected to display the images in the
viewfinder (EVF COLOR item on the setting
menu DISPLAY SETUP screen). The
resolution is the same with either setting.
O When the EVF DTL/END SEARCH button
is pressed, the outlines of the images in the
viewfinder are accentuated, and focusing is
thereby facilitated.
8
Press the MENU button three times to
release the menu mode.
Attaching the eye cup
To attach the eye cup, align the projections
on the eye cup holder and eye cup, and fit the
holder and eye cup together.
O
Turning the eye cup after attaching it to its
holder may cause the holder to become
disengaged.
If the eye cup holder becomes disengaged,
refer to the procedure described in
“Viewfinder maintenance” (page 68) to
reattach it.
Eye cup
Eye cup holder
Projection