Panasonic AG-DVX100AP - Manual (Page 48)

48
Setting menus
The underlining indicates the factory setting.
DISPLAY SETUP screen
Item/
(display mode)
Description of settings
ZEBRA DETECT
1
(Camera) For setting the level of the zebra pattern
leaning to the left and displayed in the
viewfinder and on the LCD monitor.
80%, 85%, 90%, 95%, 100%, 105%
ZEBRA DETECT
2
(Camera) For setting the level of the zebra pattern
leaning to the right and displayed in the
viewfinder and on the LCD monitor.
80%, 85%, 90%, 95%, 100%, 105%, OFF
<Note>
When OFF has been set, the zebra pattern
is not displayed.
MARKER
(Camera) For switching display of the marker
ON/OFF.
ON
OFF
O When ON is set, the marker can be
displayed by pressing the ZEBRA
button.
When the marker is displayed, the video
level of the image near the center of the
screen is displayed as a percentage
value at the bottom left of the screen.
DATE/TIME
(Camera)
(VCR) For setting the date and/or time to be
displayed in the viewfinder, on the LCD
monitor and in the video output signals.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
Both the date and time are displayed.
O When a setting other than OFF is
selected, the date and/or time are
displayed in the video output signals
regardless of the setting selected for the
VIDEO OUT OSD item.
LEVEL METER
(Camera)
(VCR) For setting the audio level meter display to
ON or OFF.
OFF
ON
ZOOM•FOCUS
(Camera) For setting the zoom and focus value
displays to ON or OFF.
OFF
ON
TAPE•BATTERY
(Camera)
(VCR) For setting the remaining tape amount and
remaining battery charge displays to ON or
OFF.
OFF
ON
OTHER
DISPLAY
(Camera)
(VCR) For setting the amount of information to be
displayed in the viewfinder and on the LCD
monitor. (See page 57)
OFF, PARTIAL, ALL
VIDEO OUT OSD
(Camera)
(VCR) When ON is set, the information displayed
in the viewfinder and on the LCD monitor is
output as the video output signal together
with the images.
ON
OFF
LCD
BACKLIGHT
(Camera)
(VCR) For adjusting the backlight of the LCD
monitor.
When HI is set, the monitor becomes
brighter than usual.
HI
NORMAL
CAMERA DATA
(VCR) When ON is set, the camera information
(such as camera shake correction, iris
value and gain value) is displayed when the
tape is played back.
OFF
ON
Item/
(display mode)
Description of settings
EVF SET
(Camera)
(VCR) For adjusting the display level of the
viewfinder images.
EVF COLOR LEVEL:
The color level of the viewfinder’s
images is adjusted.
EVF BRIGHTNESS:
The brightness of the viewfinder’s
images is adjusted.
EVF CONTRAST:
The contrast of the viewfinder’s images
is adjusted.
LCD SET
(Camera)
(VCR) For adjusting the display level of the LCD
monitor images.
LCD COLOR LEVEL:
The color level of the LCD monitor’s
images is adjusted.
LCD BRIGHTNESS:
The brightness of the LCD monitor’s
images is adjusted.
LCD CONTRAST:
The contrast of the LCD monitor’s
images is adjusted.