Panasonic DMR-HS2 User Manual
Page 47
E
d
it
ing
47
RQT6570
0001
[Note]
≥
“Picture” and “Files” refer to numbers inside the
folder selected. Lower files are not included.
≥
If there is more than one upper folder, pressing
[
:
], [
9
] will switch between them [
➜
page 9,
“Folders that can be displayed/saved” (underlined
section)].
Press [
2
,
1
] to select
“HDD” or “DVD”.
Press [
3
,
4
,
2
,
1
] to select “All
copy” and press [ENTER].
All still pictures are copied, and ALL COPY
screen reappears.
[Note]
Still pictures are copied but non-compatible files and folders will not copied.
(
➜
page 9, “Folders that can be displayed/saved”).
To select still pictures one by one
Press [
3
,
4
,
2
,
1
] to select a still picture and press
[ENTER]. (A check mark appears on the still picture.)
To select all the still pictures in the folder
Press [
3
,
4
,
2
,
1
] to select “Folder” and press [ENTER].
(A check mark appears on the folder’s name; check marks
inputted separately will be erased.)
To erase check marks
Press [
3
,
4
,
2
,
1
] to select the folder or still picture with the
check mark and press [ENTER].
To select the copying drive
While the confirmation screen is displayed
1. Press [
3
,
4
] to select “Destination” and press [ENTER].
2. Press [
2
] and [
3
,
4
] to select the drive.
3. Press [
1
] and [
3
,
4
] to select the folder and press [ENTER].
≥
Some folders cannot be copied to [
➜
page 9, “Folders that can be
displayed/saved” (indicated by
§
)].
Press [
3
,
4
] to
select still picture’s
folder and press
[ENTER].
Press [
2
] and
[
3
,
4
] to select
the drive and
press [
1
].
To enter the folder’s title
Press [
1
] to select “Folder Title” and press [ENTER].
(
➜
Entering text, page 45)
≥
You can enter up to 36 characters.
≥
Folder titles entered using this unit will only be displayed using
this unit. Folders entered using this unit are written to the
TITLE.DVD file.
≥
If there is not enough space for the entry or if the limit for the
number of files has been exceeded (
➜
Still pictures, page 9),
the title cannot be entered.
Select the
copying
drive.
(
➜
below)
Press [
3
,
4
,
2
,
1
]
to select “Copy”
and press [ENTER].
Copying still pictures
begins.
Press [
3
,
4
,
2
,
1
]
to select “Copy”
and press [ENTER].
A confirmation screen
appears.
Press [
3
,
4
,
2
,
1
] to select a
folder or still picture and press
[ENTER].
(See below)
A check mark appears on
the still picture.
≥
Repeat this if you select more than one
still picture.