Changing the remote control code, Press [set up] to show the menus, Press [ 3 , 4 ] to select “set up” and press [ 1 – Panasonic DMR-HS2 User Manual
Page 65: Press [set up
A
d
v
a
nc
e
d
op
e
ra
tion
65
RQT6570
Changing the remote control code
!?
Most of the DVD recorders and players manufactured by Panasonic
use the same remote control system. If you have more than one
piece of equipment placed in proximity to each other, they may all
respond to the signal. If this occurs, you will have to alter the code
on the unit as well as on the remote control (the two must match)
using the following procedure.
≥
Use “1”, the factory set code, under normal circumstances.
1
Press [SET UP] to show the menus.
2
Press [
3
,
4
] to select “Set Up” and
press [
1
].
3
Press [
3
,
4
] to select “Remote Con-
trol Code” and press [ENTER].
4
Press [
3
,
4
] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
5
While pressing [ENTER] on the
remote control, press the numbered
button ([1], [2] or [3]) corresponding
to the code you selected in step 4.
The remote control code on the remote control has been set.
6
Press [SET UP]
If the unit doesn’t respond, you have entered the wrong code.
Repeat step 5 to enter the correct code.
[Note]
The following display appears on the unit’s display if its code and the
remote control’s code are different. Change the remote control’s
code to suit the unit. The display disappears after about 5 seconds.
≥
You can also set the unit’s code without using the remote control.
1
Press [FUNCTIONS] on the unit.
2
Press [
3
,
4
,
2
,
1
] to select “SET UP” and press [ENTER].
3
Carry out procedure 2-4 above.
4
Press [RETURN].
DVD
VCR Plus+ TV/VIDEO REC MODE REC
CH
VOLUME
TV
TV
DVD
1
2
3
7
8
9
0
100
4
5
6
SLOW/SEARCH
DIRECT NAVIGATOR
TOP
MENU
MENU
RETURN
FUNCTIONS
PROG/CHECK
DISPLAY TIME SLIP
ADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
Н
Н
OPEN/CLOSE
SET UP
ERASE
DUBBING POSITION MEMORY MARKER
AUDIO
INPUT SELECT CM SKIP
STATUS
SKIP
HDD
DVD
3
,
4
,
2
,
1
ENTER
SET UP
3
,
4
,
2
,
1
ENTER
FUNCTIONS RETURN
Numbered
buttons
TAB
SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plus
i CH Setting
CATV
Channel
SET UP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
The unit’s remote control code