Specifications, Product service – Panasonic DMR-HS2 User Manual

Page 71

Advertising
background image

71

RQT6570

Ref

e

rence

Specifications

Recording system:

DVD video recording standards
(DVD-RAM),
DVD video standards (DVD-R)

Hard disk drive capacity:40 GB
Optical pick-up:

System with 1 lens, 2 integration units
(662 nm wavelength for DVDs, 790 nm
wavelength for CDs)

Recordable discs:

12 cm 4.7 GB DVD-RAM discs
12 cm 9.4 GB DVD-RAM discs
8 cm 2.8 GB DVD-RAM discs
12 cm 4.7 GB DVD-R discs

(for General Ver. 2.0)

Recording time (1):

Max. 6 hours (using 4.7 GB disc)
XP: 1 hour

SP: 2 hours

LP: 4 hours

EP: 6 hours

Recording time (2):

Max. 52 hours (using Hard disk drive)
XP: 8.5 hours

SP: 17 hours

LP: 34 hours

EP: 52 hours

Discs played:

12 cm 4.7 GB DVD-RAM discs
12 cm 9.4 GB DVD-RAM discs
8 cm 2.8 GB DVD-RAM discs
12 cm 4.7 GB DVD-R discs

(for General Ver. 2.0)

DVD-VIDEO discs
CD-Audio discs (CD-DA)
Video CD discs
CD-R/CD-RW discs

(CD-DA, Video CD formatted discs)

Video system

TV system:

NTSC system, 525 lines, 60 fields

Recording system: MPEG2 (Hybrid VBR)
Input:

LINE (pin jack), 1.0 Vp-p; 75

S connector Y: 1.0 Vp-p; 75

C: 0.286 Vp-p; 75

Output:

LINE (pin jack),1.0 Vp-p; 75

S connector Y: 1.0 Vp-p; 75

C: 0.286 Vp-p; 75

Component video output (480P/480i):

Y: 1.0 Vp-p; 75

P

B

: 0.7 Vp-p; 75

P

R

: 0.7 Vp-p; 75

Antenna reception input:

TV Channel: 2ch–69ch, 75

CATV Channel: 1ch–125ch, 75

Audio system

Recording system: Dolby Digital (XP/SP/LP/EP)

LINEAR PCM (XP mode only)

Input:

LINE (pin jack)
Reference input: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 47 k

Output:

LINE (pin jack)
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 k

(Load impedance: 10 k

)

Number of channels:Recording:2 channels

Playback:2 channels

Other input/output connectors:

Digital audio optical output connector
(PCM, Dolby Digital, DTS)

Operating temperature range:

5

o

C–40

o

C (41

o

F–104

o

F)

Operating humidity range:

10 %–80 % RH (no condensation)

Clock unit:

Quartz-controlled 12-hour digital display

LASER Specification

Class

I

LASER Product

Wave length:

775–815 nm 655–666 nm

Laser power:

No hazardous radiation is emitted with the
safety protection

DV input:

IEEE 1394 Standard, 4 pin

PC card slot:

PC Card Type

II

Compatible media: A PC Card adaptor conforming to PC Card

Standards
PC Card adaptor (SD Memory Card, Multi
Media Card, Compact Flash, Smart Media,
Memory Stick)

Format:

FAT12 or FAT16

Image format:

JPEG conforming to DCF (Design rule for
Camera File system)
DPOF Compatible

Number of pixels:

320

a

240 to 6144

a

4096

(sub sampling; 4:2:2 or 4:2:0)

Thawing time:

Approx. 7 sec. (2 M pixels)

Power supply:

AC 120 V, 60 Hz

Power consumption: 36 W
Dimensions:

Approx. 430 (W)

k

79 (H)

k

306 (D) mm

[Approx.16

15

/

16

q

(W)

k

3

1

/

8

q

(H)

k

12

1

/

16

q

(D)]

(excluding protrusions)

Mass:

Approx. 4.5 k

g

(9.9 lbs)

[Note]

Specifications are subject to change without notice.
Mass and dimensions are approximate.

Power consumption in standby mode: approx. 3.3 W

1. Damage requiring service—The unit should be serviced by quali-

fied service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change

in performance; or

(e) The unit has been dropped or the cabinet damaged.

2. Servicing—Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servicing
to authorized servicing personnel.

3. Replacement parts—When parts need replacing ensure the ser-

vicer uses parts specified by the manufacturer or parts that have
the same characteristics as the original parts. Unauthorized substi-
tutes may result in fire, electric shock, or other hazards.

4. Safety check—After repairs or service, ask the servicer to perform

safety checks to confirm that the unit is in proper working condition.

For product information or assistance with product operation:

In the U.S.A., contact the Panasonic Customer Call Center at
1-800-211-7262, or e-mail [email protected], or
web site (http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre
at 1-800-561-5505, web site (www.panasonic.ca), or an authorized
Servicentre closest to you.

Product Service

Product information

Advertising