Polaris Trail Boss 330 Quadricycle - Manual (Page 47)

1
2
3
1
2
45
FEATURES AND CONTROLS
Brakes
WARNING
Operating the Quadricycle while the parking brake is engaged
could result in an accident and serious injury or death. Always
check to be sure the parking brake is disengaged before
operating.
Locking the Parking Brake (Mechanical)
The right brake lever is used as a mechanical parking brake only. It is
not intended to be used as a brake lever.
1. Squeeze the right brake
lever (1) toward the
handlebar.
2. Move the park brake
lock (2) toward the
handlebar until the peg (3)
fits into the slot on the
lever. Release the lock lever.
3. To release the parking brake lock, squeeze and release the brake
lever. The parking brake will release automatically.
NOTE: The parking brake may relax if left on for a long period of
time. Always block the wheels to prevent rolling. Never
depend on the parking brake alone if the vehicle is parked on
a hill. Always block the wheels to prevent rolling.
Locking the Parking Brake (Hydraulic)
The hydraulic parking brake lock is a temporary lock. Do not rely on
the hydraulic parking brake when leaving the vehicle unattended.
Always lock the mechanical parking brake.
1. Squeeze the left brake lever (1).
2. Move the park brake lock (2) to
the locked position. This will
prevent the lever from returning
to the released position.
3. To release the parking brake
lock, squeeze and release the
brake lever. The parking brake
will release automatically.