Polaris Trail Boss 330 Quadricycle - Manual (Page 78)

2
1
76
MAINTENANCE AND LUBRICATION
Steering / Suspension
Toe Alignment
Use the following procedure to check the toe alignment of the vehicle.
The recommended toe alignment is 3-6 mm toe out.
1. Set the handlebars in a
straight-ahead position.
2. Place stands (1) in front of the
vehicle, perpendicular to the
rear tires.
3. Tie an elastic string around the
stands, making sure the string
just touches the side surface of
the rear tires on each side of
the vehicle and goes around the
stands in front of the vehicle (2).
4. Measure the distance from the
string to the rim at the front
and rear of the front rim (3).
The rear measurement should
be 2 to 3 mm more than the
front measurement.
NOTE: If you discover improper
alignment, see your Polaris
dealer for service.
WARNING
Do not attempt to adjust alignment. All steering adjustments
should be performed by an authorized Polaris dealer.
Rear Springs
The rear shock absorber springs are
adjustable. Use the spanner wrench (1) in
the tool kit.
Rotate the adjuster (2) clockwise to increase
or counterclockwise to decrease spring
tension.
1
2
3