Panasonic KX-TC1220NZW - Manual (Page 17)

17
Preparation
Auto talk
:On
H
Program
GF H
=Yes
Auto talk
:Off
GF H
=Save
Auto talk
:On
GF H
=Save
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit without pressing
(TALK) . If you want to use this feature, you
need to enable this feature. Your phone comes from the factory set to
OFF.
Make sure the unit is in the standby mode initially.
1 Press (FUNCTION/EDIT) .
2 Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3 Press á (Yes key).
4 Press Ö or Ñ repeatedly until the arrow
points to “Talk switching”.
5 Press á (Yes key).
6 Press Ö or Ñ to select “On” or “Off”.
7 Press á (Save key).
•A beep sounds.
•To return to the standby mode, press
(EXIT/CH).
•You can exit the programming mode any time by pressing (EXIT/CH).
•In order to view Caller ID information before answering a call, leave the Auto Talk
feature OFF.
H
Talk switching
Set area code
GF H
=Yes