Battery replacement – Panasonic KX-TC1220NZW User Manual
Page 52
Advertising
52
Battery Replacement
If “Recharge” is displayed and/or “
” flashes after being fully
charged, replace the battery with a new Panasonic P-P102 battery.
To avoid memory loss, replace within 3 minutes.
1
Press the notch on the
battery cover firmly and slide
it as indicated by the arrow.
2
Remove the old battery.
Then install the new one.
•Insert the battery plug into the
connector as shown.
3
Close the cover. Make sure you charge
the new battery for about 10 hours so
that the battery strength indicator
appears (p. 12).
Black
Lead
Red
Lead
Advertising