Panasonic KX-TC1220NZW - Manual (Page 22)

Making Calls
22
To dial after confirming the entered number
1 Dial a phone number.
•If you misdial, press Ü and dial again.
2 Press (TALK) .
•After a few seconds, the display will show the
length of the call and the battery strength.
3 To hang up, press (TALK) or place the
handset on the base unit.
To redial after confirming the last number dialled
Press (REDIAL/PAUSE) and press (TALK) .
To adjust the receiver volume while talking
To increase, press Ñ .
To decrease press Ö .
•Each time you press Ö or Ñ, the
volume level will change.
•The display will return to the length of
the call.
Backlit handset keypad
The handset dialling buttons will light when you press a button or lift the
handset off the base unit, or flash when a call is received.
The lights will turn off a few seconds after pressing a button, lifting the
handset, answering a call, hanging up a call, leaving the programming
mode or ending the intercom.
Backlit LCD display
The backlit handset display will stay on for a few seconds after pressing a
handset button, lifting the handset off the base unit, hanging up a call,
leaving the programming mode or ending the intercom.
Talk
0233334444
Talk
00-00-00
Loud
Low
❚ ❚ ❚ ❚ ❚ ❚ High
GF
0233334444
HIGH
LOW
Loud
Low
❚ ❚
High
GF
Off
00-01-08
Ц С