Panasonic SC-EN15 - Manual (Page 7)

7
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep
these operating instructions handy for future reference.
1)
Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Selecting fine audio equipment such as the unit you’ve just purchased is only the
start of your musical enjoyment. Now it’s time to consider how you can maximize
the fun and excitement your equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or distortion–and,
most importantly, without affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to
your hearing.
Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the
future. After all, we want you listening for a lifetime.
1. Damage requiring service — The unit should be serviced by qualified
service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized servicing
personnel.
3. Replacement parts — When parts need replacing ensure the servicer uses
parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in
fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform safety
checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire system.
For product information or assistance with product operation:
In the U.S.A., refer to "Customer Services Directory" on page 8.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
905-624-5505, or visit the website (www.panasonic.ca), or an authorized
Servicentre closest to you.
User memo:
IMPORTANT SAFETY INSTRUCTIONS
Listening caution
EST. 1924
Product Service
Product information
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
The model number and serial number of this product can be found on
either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER
SERIAL NUMBER
Specifications
gMain unit
Radio
Frequency range
FM 87.9–107.9 MHz (200 kHz steps)
87.5–108.0 MHz (100 kHz steps)
AM 520–1710 kHz (10 kHz steps)
CD player
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Beam source
Semiconductor laser (wavelength 780 nm)
Number of channels 2 channel, stereo
Wow and flutter
Less than possible mesurement data
D/A converter MASH (1 bit DAC)
Terminals
Input AUX: 3.5 mm stereo (27 k Ω)
Output PHONES: 3.5 mm stereo (32 Ω)
General
Power supply AC 120 V, 60 Hz
Power consumption 28 W
Dimensions (W×H×D) 206 mm×204 mm×214 mm
(8 1 /
8
″ Ч8 1 /
32
″ Ч8 7 /
16
″ )
Mass
With speakers 4.0 kg (8 lb. 13 oz.)
Without speakers 2.4 kg (5 lb. 5 oz.)
gSpeakers
Full range 8 cm (3 1 /
8
″ ), 6 Ω×2
Ceramic tweeter 1.52 cm ( 19 /
32
″ ) ×2
Dimensions (W×H×D) 115 mm×211 mm×215 mm
(4 17 /
32
″ Ч8 5 /
16
″ Ч8 15 /
32
″ )
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Power consumption in standby mode: 3.4 W
MPEG Layer-3 audio decoding technology
licensed from Fraunhofer IIS and Thomson
multimedia.