Precor C842i - Manual (Page 14)

Product Owner’s Manual: Club Features 12
Changing the Custom Program
Important: To change the Custom Program, it is highly
recommended that you use the optional power adapter. Otherwise,
you will need to maintain a pedal speed above 20 revolutions per
minute to keep the cycle from shutting down.
When you design a custom program, you are preprogramming the
resistance for each column in the program profile.
11. A blinking column appears in the display. Use the COURSE
CHANGE ▼▲ keys to change the height of the column.
12. When the column height is set, use RESISTANCE
▲ to move to
the next column. You can use RESISTANCE ▼ to move back
and change earlier columns as needed.
13. Continue setting resistance level for each column in the profile.
14. When you are ready, press ENTER to save the program and
return to the Precor banner.
Note: If you prefer to exit the program without saving changes to
the custom profile, press RESET.
Diagram 4: Modify the Custom program
Heart Rate Above
Below
Weight Loss
Cardiovascular
TIME
REMAINING TIME
SEGMENT TIME
DISTANCE
SPEED
RESISTANCE
RPM
METS
AVERAGE SPEED
CALORIES
WATTS
CAL PER MIN
C846i
CAUTION
Before beginning any fitness program, you
should have a complete physical examination by
your physician. Consult your physician for the
heart rate appropriate for your fitness level. If
you feel pain, faint or dizzy, stop exercising
immediately. Keep hands and clothing away from
moving parts. Do not allow children and people
unfamiliar with operation on or near the unit.
Use arrows (or numeric keys) to display:
TIME WEIGHT AGE
(press ENTER to select) (press ENTER to select) (press ENTER to select) (press ENTER to select)
(press ENTER to select) (press ENTER to select)
PROGRAM (press ENTER to select) (press ENTER to select)
PRESS PRESS
PRESS PRESS
O p t i o n 1
O p t i o n 2 - p r o g r a m s
ENTER
QUICKSTART
PROGRAM CHAN
GE
change resist cstm crs