Precor C842i - Manual (Page 23)

Product Owner’s Manual: Maintenance 21
Recumbent Seat Adjustment
1. Sit on the seat with your feet in the pedals.
2. Pull the seat adjustment handle up while you bend your knees
and slide the seat forward or backward along the seat rail. Refer
to Diagram 8.
Diagram 8: Adjusting the seat on the C842i Recumbent Cycle
3. Align the seat with one of the marks on the seat rail and release
the handle.
4. Try to slide the seat along the seat rail. Make sure the seat does
not move before beginning your exercise session.
Upright Cycles: Adjusting the Seat Tilt
To adjust the seat tilt on upright cycles, take the following steps.
1. Use a 11/16-inch (17 mm) box-end wrench or crescent wrench
to loosen the nut beneath the seat. Refer to Diagram 9.
Diagram 9: Loosen nut to adjust seat tilt