PSC PT Program Generator - Manual (Page 136)

PPG Tutorial
124
PT Program Generator (PPG) v5.0
Enable <F4> and choose Exit Main Menu to return to the
Main
Menu if the user presses <F4> .
Figure 97. New text for the Menu: Error Text node
3. Press OK to save your settings and exit the dialog box.
The Display: Successful Node
Complete the following steps to set up this node:
1. Select the Display: Successful node to open its dialog.
2. Enter the text shown in Figure 98 .
Figure 98. Display text for successful upload
3. Press OK to save your settings and exit the dialog.
The Input: Timeout Display Node
Complete the following steps to set up this node:
1. Select the Input: Timeout Display node to open its dialog box.
2. Enable the Function Key checkbox. Select Modify Erase File
in the box to the right of the Function Key.
A Menu node is not required here, because only one option is given, and it is exe-
cuted if any function key is pressed, not only <F4> . The Input node that follows this
operation will accomplish this task.
2342.book Page 124 Thursday, July 22, 2004 8:35 AM