PSC PT Program Generator - Manual (Page 139)

Loading and Using the Program
User’s Guide
127
1. Double-click on the PPGXFER window's Control-menu box or select
File > Exit to close the window. (If downloading was unsuccessful,
choose Abort from the menubar first.)
2. Double-click on the Control-menu box in the Compiler window to
close it.
3. Disconnect the portable from the cable, and press the <F3> key to
begin collecting data.
4. Scan the following bar codes at least once. Each time a code is
scanned correctly, you should hear a single beep.
• You will not see the scanned codes on the portable’s screen,
because they are overwritten by the redisplayed menu once the
data is input.
• When you scan the last code, which contains an alphabetic
character, you'll hear a double beep, indicating an error.
5. Enter the following four codes using the portable’s data keys. The por-
table beeps each time you press a key. Press ENTER after each com-
plete number.
6. Press the <F4> key to return to the program's Main Menu .
12345 67890
98765 54321
* 1 2 3 4 5 6 * * 9 8 7 6 5 4 *
* 1 9 2 8 3 7 * * 2 2 3 3 4 4 *
* 9 1 8 2 7 3 * * 9 0 1 0 2 A *
2342.book Page 127 Thursday, July 22, 2004 8:35 AM